Please Note: The 4ipnet OWL610 Outdoor Access Point is End of Life.
4ipnet OWL610 Outdoor Access Point
The 4ipnet OWL610 Outdoor Access Point is a Wi-Fi 802.11a/b/g/n device for long range wireless transmission. Its rugged IP68-rated metal housing is weatherproof, watertight and rust-resistant, making it an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments.
4iipnet OWL610 Outdoor Access Point Features
- Rugged, Compact-Sized, and Adaptive to Versatile Environments
- 2x2 MIMO solution with N-type Connector
- High-speed with QoS for Voice, Video, and Data Applications
- IGMP Snooping
- Business-class Security and Multiple-SSID/ VLAN tagging Support
- Gigabit Ethernet Port with PoE & Flexible Mounting Options
The OWL610 Access Point supports multiple operation modes (AP/Bridge) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode, OWL610 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together.
Coming with business-class security, the OWL610 in AP mode is also ideal for enterprise applications. Furthermore, one OWL610 access point with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.
Being a versatile Wi-Fi device, OWL610 does not limit itself to outdoor usage only. When managed by a 4ipnet Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.
4ipnet OWL610 Outdoor Access Point - Technical Specifications
Wireless Radio
- Frequency band: 2.4 GHz or 5 Ghz
- Modulations:
- DSSS (CCK, DQPSK, DBPSK)
- OFDM (64QAM, 16QAM, QPSK, BPSK)
- Channels:
- USA (Channel 1~11)
- Japan (Channel 1~14)
- Europe (Channel 1~13)
- Data rate with auto fallbak:
- 802.11a: 6 ~ 54 Mbps
- 802.11b: 1 ~ 11 Mbps
- 802.11g: 6 ~ 54 Mbps
- 802.11n: 6.5 ~ 300Mbps
- Receiver Sensitivity:
- 802.11a: -95dBm@6Mbps
- 802.11b: -95dBm@1Mbps
- 802.11g: -95dBm@6Mbps
- 802.11an HT20: -95dBm@MCS0
- 802.11an HT40: -91dBm@MCS0
- 802.11gn HT20: -95dBm@MCS0
- 802.11gn HT20: -90dBm@MCS0
- RF max transmit power:
- US version: 300 mW
- EU version: 100 mW
Multiple Operating Modes
- Wireless architecture:
- AP mode
- WDS repeater mode (WDS Bridge), supporting up to 8 WDS links per AP
General Access Point Features
- Number of VAP (ESSID): 8
- Number of associated clients per VAP: 32
- Setting for maximum number of associated clients
- Beacon interval: Adjustable to best adapt to the deployment environment
- Auto fallback: Data rate for long distance communication in noisy environments
- IAPP: To provide a faster roaming capability for the stations among different APs nearby
- 802.11g protection: Not to be affected with surrounding existence of 802.11b stations
- RTS/CTS and fragmentation control
- ACK timeout support
- Adjustable transmission power: 5 levels
- Wireless site survey: For scanning the surrounding access points for connection
- Support IEEE 802.11e WMM and QoS within WDS Link
Security
- Data encryption: WEP (64/128/152-bits), WPA/WPA2 with TKIP or AES-CCMP with key's refreshing period setting
- User Authentication: WEP, IEEE 802.1X, WPA-PSK, WPA-RADIUS, MAC ACL, MAC authentication using RADIUS with built-in 802.1X Authenticator
- Supports IEEE 802.11 mixed mode; open and shared key authentication
- Hidden ESSID: Broadcast SSID enable/disable
- Station Isolation : All associated stations can not communicate with each other when enabled
- Supports AES data encryption over WDS link
- Build-in Layer 2 Firewall, blocking Dynamic ARP Inspection & DHCP Snooping
Administration
- Web-based management interface with remote configuration management and firmware upgrade capabilities
- Software one-button-click to reset factory defaults
- Utilities for system configuration backup and restoration
- “root” for the WISP administrator, who can change all settings including bandwidth limit
- “admin” for the local administrator, who can view all settings and change only some preferences
- SNMP MIBII support (v1/v2c)
- NTP time synchronization
- Watch dog: Auto recovery while detecting system fault
- Syslog client
- Supports Event Log and SYSLOG reporting to external server
- Supports RADIUS accounting and accounting update
- Supports statistics on total transmission encountered and transmitting error occurred
Hardware and Environment
- Metal case: Weather proof, compliant with IP68 Standard
- Uplink Port: 1 × 10/100/1000 Base-T Ethernet with IEEE 802.3af PoE (PSE is optional)
- LAN Port: 1 × 10/100/1000 Base-T Ethernet
- Console Port: 1 × RJ45
- Antenna: 2 × N-type connectors
- Form Factor: Wall or Pole Mountable
- Dimensions (W x D x H): 9.5” x 9.1” x 5.2” (240 x 230 x 130 mm)
- Weight: 5.3 lbs (2.4kg)
- Operation Temperature: -30 ~ +70 °C (-22 ~158 °F)
- Storage Temperature: -40 ~ +85 °C (-40~185 °F)
- Operation Humidity: 0 ~ 95% maximum(Non-condensing)
- Storage Humidity: 100% (Non-condensing)
Certifications
- FCC, CE, IP68, RoHS compliant
Package Contents
- 4ipnet OWL610 x 1
- CD-ROM (with User's Manual and QIG) x 1
- Quick Installation Guide x 1
- Mounting Kit x 1