4ipnet SW1008 8 Port PoE+ Unified Access Switch
4ipnet SW1008 is an 8-port PoE+ compliant gigabit Ethernet access switch, designed specifically for small/medium sized businesses, hotels, and organizations that need to expand wired connectivity. Without any additional configuration beyond connecting Ethernet cables, the SW1008 can provide both data and power transmission between itself and peripheral devices, such as 4ipnet EAP/OWL-series access points, video surveillance systems, and VoIP phones. Uniting both wired and wireless devices at the network edge has never been easier.
4ipnet SW1008 8 Port PoE+ Unified Access Switch Key Features
- Plug-and-play deployment
- 8 PoE/PoE+ gigabit Ethernet ports
- IEEE 802.3af (PoE) and 802.3at (PoE+) compliant
- Supplies 48V DC with 30 watts per port
- Up to 150 watts total power budget
- Forwarding rate of 1.488 Mpps
- Supports automatic fault detection
- IEEE 802.3az Energy Efficient Ethernet
The SW1008 supports a total power budget of 150 watts for up to 8 powered devices, with up to 30 watts of power for each of its IEEE 802.3af/at compliant ports. Along with its 1,488,000 pps forwarding rate, the SW1008 is one of the most robust and powerful access switches in its category. Even more surprising is that all of this is packed in a small and efficient form factor, allowing it to be placed directly on the desks of users. For those worried about noise disturbances, the SW1008's fan-less design enables it to operate in near-silence. Finally, seamless integration with 4ipnet WHG Controllers and EAP/OWL Access Points allows for the quick and easy deployment of a complete 4ipnet-based wireless edge.
Reduced costs with POE/POE+
Power-over-Ethernet (PoE) enables power and data transmission to be co-located in a single Ethernet cable, eliminating the need for separate power adaptors when deploying powered devices. Traditionally, organizations would have to install appropriate wired cabling to provide this power. Now, all that is needed is the SW1008 and Ethernet cables, greatly diminishing the cost of deployment and maintenance.
Simple + Easy Configuration
Getting the SW1008 up and running with peripheral devices could not be any easier - just power up the SW1008 and connect the devices with Ethernet cables. With automatic detection of PoE compatibility, the SW1008 will only provide data if the device on the other end is not PoE compatible.
Deployed anywhere you want
The fan-less design of the SW1008 enables it to operate at extremely low noise levels. Combined with the small and sleek form factor, the SW1008 be placed underneath the desk of a dense office environment without being noticed. At the same time, the SW1008 can be installed in server rooms or network operations centers by installing it to a 19" (1U) cabinet with the rack-mount kits.
4ipnet SW1008 8 Port PoE+ Unified Access Switch - Technical Specifications
Physical Dimensions
- 26.6 cm x 18.4 cm x 4.4 cm (W x D x H)
- Weight: 1.50 kg (3.30 lbs)
Interfaces
- 8 x 10/100/1000Base-T RJ-45 Ports with PoE+
- Transmission Media: 10Base-T Cat-3/4/5 UTP/STP, 100Base-TX Cat-5 UTP/STP, 1000Base-T Cat-5e UTP/STP
- Max. Output Power per Port: 30W
- Max. Output Power per System: 150W
Environmental Conditions
- Operating Temperature: 0°C (32°F) to 50°C (122°F)
- Operating Humidity: 10% to 90% non-condensing
Power
- AC Input: 100 to 240V, 50/60 Hz
- Power Consumption: 5W max.
LED Indicators
- Power, Ethernet LNK/ACT, PoE
Performance
- Forwarding Rate: 1,488,000 pps
- MAC Address Table Size: 8k
- Packet Buffer: 128k
- Jumbo Frame Support: 9k
- Automatic PoE Detection and Fault Detection