Extricom EXRP-30n Three Radio Ultrathin Access Point
The EXRP-30n Three-Radio UltraThin™ Access Point (AP) is a key component of Extricom’s 802.11n-enabled, Interference-Free™ Wireless LAN System. The Extricom WLAN, based on patented Channel Blanket™ technology, makes possible the only truly disruption-free introduction of maximum-performance 802.11n in the enterprise.
Uncompromising Performance
Extricom’s solution permits gradual deployment of 802.11n, without requiring a redesign of the existing wireless and wired network, and no “forklift” cut-over from 802.11a/b/g to 802.11n. In fact, only the Extricom system enables co-existence and full-performance of both ‘n’ and legacy ‘g/b’ devices at 2.4GHz. And as further evidence of Extricom’s unique architecture, the EXRP-30n three-radio AP will maintain full operation and transmission rates on all radios even when powered by the existing 802.3af PoE standard.
Surprising Simplicity and Flexibility
The Extricom EXRP-30n is a high-bandwidth device, containing a total of three Wi-Fi radios: two 802.11 n/a/b/g and one 802.11a/b/g. And since all of the system intelligence resides in the Extricom WLAN Switch, AP installation is truly plug-and-play. APs can be deployed in any density, with whatever spacing needed to guarantee high-quality, high-speed connectivity everywhere.
In this respect, the Extricom deployment philosophy is like that of wired networks: simply place APs wherever service is required, based solely on the desired grade of service (i.e. connection rate), without any of the interference, channelization, or coverage/capacity constraints seen in traditional WLANs. And you do this without time- or labor-intensive RF cell planning.
In addition, the fully integrated antennas of the EXRP-30n provide a fast-track to deployment, with no other hardware to install or external power sources needed.
Features and Benefits:
Guaranteed Service Level
Regardless of radio band (2.4 or 5 GHz) or channel, EXRP-30n APs are deployed in any density convenient to the enterprise, to achieve both blanket coverage and a guaranteed communications rate to all users.
Full-Performance in Mixed Environment
Extricom Channel Blanket deployment of EXRP-30n APs permits ‘n’ and legacy ‘a/b/g’ devices to co-exist, in either band, with full speed and throughput maintained for all.
Zero Configuration AP
Extricom’s UltraThin APs enable true plug-and-play deployment. With no software inside, each AP requires no configuration and is completely interchangeable.
Immune to MIMO Coverage Variability
With all APs able to receive on the same channel, the Extricom WLAN provides uplink path diversity for client transmissions, making the system immune to the variance in coverage caused by MIMO antenna technology.
Ease of Installation / Standard PoE
The EXRP-30n is equipped with integrated antennas and maintains full operation with 802.03af PoE power.
Key Features
- Tri-Radio Access Point with Integrated Antennas
- Works in Mixed 802.11 n/a/b/g Environments with No Loss of Throughput
- MIMO 3x3 Configuration
- Zero AP-to-AP Handoff Delay
- Link Resilience with AP Path Diversity
- Anti-Breach Security and Built-in Rogue AP Detection
- Zero–Configuration Device
- Standard 802.3af PoE on single cable supports full-rate on all radios concurrently
- Multi-layered security including standards-based WPA2 security and rogue detection
- Integral Hanging Brackets