InfiNet InfiMAN 2x2 3.5 GHz R5000-Sc Medium-capacity Integrated Antenna Subscriber Terminal
The InfiMAN 2x2 3.5 is Infinet's latest family of solutions designed to operate in the licensed band 3.4 to 3.7 GHz. It comprises of a number of high-performance broadband wireless point-to-multipoint modules, designed primarily to cater for the specific requirements of local authorities, service providers or other organizations that have purchased WiMAX licences.
The innovative high-speed base stations provide an unparalleled sector capacity of up to 240 Mbps and use leading-edge radio protocols to provide unrivalled spectral efficiency. They enable operators to deploy more efficient and scalable networks for data, video and voice transmission, whilst at the same time offering up to five times the throughput of existing systems in this frequency range.
Compared to traditional Point-to-Multipoint systems, both operating range and link reliability have increased significantly through the use of advanced Multiple Antenna Technology and Adaptive Multipoint Access Protocol.
The InfiMAN 2x2 3.5 series represents a unique proposition to operators who have already invested in a WiMAX license but now wish to deliver Fast Ethernet data, voice and video services over long distances, whilst at the same time providing a wide set of networking features and maintaining strict QoS control.
Applications
Key applications of the InfiMAN 2x2 family of solutions include:
- High-Speed local or wide area corporate networks
- CCTV and Video surveillance Networks
- Triple-play services for Wireless ISP's
- Long-range Rural Connectivity
- Military Networks
- Government & Municipal Networks
Key Features and Benefits
- Available in 3.4 to 3.7 GHz frequency bands
- Unrivaled spectral efficiency of 6.5 Bit/s/Hz
- 240 Mbps base station sector capacity with just 40 MHz of spectrum, reducing capital expenditure
- Increased NLOS range and performance
- 3.5/5/7/10/14/15/20/28/30/40 MHz channel widths
- Advanced Quality-of-Service features, offering a reliable and robust solution
- High Transmit Power Base Stations
- Integrated Sector Antenna Base Stations, ensuring maximum RF performance and quick & simple installation
InfiMAN 2x2 3.5 Base Station
R5000-Omxb
- High-capacity External Antenna Base-Station
- 240 Mbps throughput
- Middle-to-long range (20+ km)
- Transmit power: up to 20 dBm
- Receiver sensitivity: -67..-101 dBm
- Frequency bands: 3.4-3.7 GHz
- Channel bandwidth: 3.5/5/7/10/14/15/20/28/30/40 MHz
- 2 x N-type (Female) connectors
- Center frequency adjustment step: 125 kHz
- Channel duplex: TDD
- Gigabit Ethernet port (10/100/1000 Base-T) RJ-45 connector
- Serial port (RS-232)
- Up to 30 Watts
- Consumption:110-240 VAC @ 50/60 Hz48 VDC
- Outdoor Unit (ODU):240 x 240 x 51 mm 2.3 kg
- Indoor Unit (IDU-BS or IDU-BS-G):124 x 72 x 38 mm 0.3 kg
R5000-Smc
- High-capacity Integrated antenna Subscriber Terminal
- Up to 20 Mbps throughput options (license upgradeable)
- Short-to-Middle range (up to 12km)
- Transmit power: up to 20 dBm
- Receiver sensitivity: -74..-101 dBm
- Frequency bands: 3.4-3.7 GHz
- Channel bandwidth: 3.5/5/7/10/14/15/20/28/30/40 MHz
- 22 dBi dual-pol integrated antenna
- 1 x Fast Ethernet (10/100 Base-T)RJ-45 connector Serial port (RS-232
- Up to 15 Watts
- Consumption:110-240 VAC @ 50/60 Hz12-48 VDC
- Outdoor Unit (ODU): 370 x 370 x 85 mm 2.2 kg
- Indoor Unit (IDU-CPE): 85 x 76 x 36 mm0.15 kg
R5000-Lmc
- High-capacity External antenna Subscriber Terminal
- Up to 20 Mbps throughput options (license upgradeable)
- Middle-to-long range (25+ km)
- Transmit power: up to 20 dBm
- Receiver sensitivity: -74..-101 dBm
- Frequency bands: 3.4-3.7 GHz
- Channel bandwidth: 3.5/5/7/10/14/15/20/28/30/40 MHz
- 2 x N-type (Female) connectors
- 1 x Fast Ethernet (10/100 Base-T) RJ-45 connector
- Serial port (RS-232)
- Up to 15 Watts
- Consumption:110-240 VAC @ 50/60 Hz 12-48 VDC
- Outdoor Unit (ODU): 240 x 240 x 51 mm 1.6 kg
- Indoor Unit (IDU-CPE): 85 x 76 x 36 mm 0.15 kg
Features
RADIO
- Voice/RTP Aware Superpacketing - to minimize jitter and latency for multimedia applications
- Automatic Bitrate Control - to ensure a 100% stable link no matter how external conditions change
- Automatic Transmit Power Control - to track and keep optimal input signal level to maximize performance per each link and reduce overall interference within given transmit power and EIRP limitations
- Automatic Distance Learning - to optimize performance for any link distances from tens of meters to 100 km and above
- Channel Time Adjustment - to improve performance on heavily loaded links
- Spectrum Analyzer mode - for interference detection and avoidance
- Channel testing tools - channel performance measurement- advanced diagnostics
MAC
- Dynamic adaptive Polling - Centralized marker grant mode- Dynamically takes into account channel activity- Permanent channel testing
- Pseudo-radio Interface - unique InfiNet Wireless feature to join InfiNet Wireless networks via 3rd party equipment (Wired Ethernet segments, IP clouds)
- Automatic over-the-air firmware upgrade
MANAGEMENT FEATURES
Web-interface
- basic settings
- channel diagnostics: spectrumanalysis, antenna alignment,channel throughput measurement
- unit and RF links monitoring- maintenance: firmware upgrade,license and configuration import/export
- tech support diagnostic reports generation
- command-line access
Command-line interface for in-depth configuration and diagnostics accessible via:
- secure shell (SSH)
- telnet- serial port
- remote shell
SNMPv1 / SNMPv3 support(MIB II, private MIB)
Configurable SNMP Traps
NETWORKING
- Ethernet-over-IP tunneling
- ARP protocol support
- MAC/IP filtering
Fully-fledged Layer 2 switch:
- Transparent transport for any type of Ethernet traffic including MPLS, stacked VLANs, etc.
- Multiple switching groups
- Full VLAN support including Q-in-Q(IEEE 802.1q and 802.1ad)
- STP/rSTP support
- IGMP Snooping with Querrier mode
- Trunk groups support
RIPv2 / OSPFv2 /static routing
- Tunneling(Ethernet-over-IP, IP-over-IP)
- L2/L3 Firewall
- NAT(multipool, H.323-aware)
- DHCP client/server/relay
QUALITY-OF-SERVICE
With many QoS permutations, QoS implementation works transparently in the network based on IEEE802.1p standard as well as ToS/DiffServ, guaranteeing perfect performance under any load and lowest jitter/delays for priority traffic.
Quality-of-Service features:
- 16 priority queues
- IEEE 802.1p support
- IP TOS / DiffServ support
- Full voice support
- Traffic limiting (absolute, relative, mixed)
- Traffic redirection
MAC
Dynamic adaptive Polling
- Centralized marker grant mode
- Dynamically takes into account channel activity
- Permanent channel testing
Pseudo-radio Interface- unique InfiNet Wireless feature to join InfiNet Wireless networks via 3rd party equipment (Wired Ethernet segments, IP clouds)
Automatic over-the-air firmware upgrade
STANDARD COMPLIANCE
- Radio- FCC Part 90 pending- EN 302 326-2 pending
- EMC- EN 301 489-1- EN 301 489-17
- Safety- EN 60 950-1:2006
- RoHS- Directive 2002/95/EC
SECURITY FEATURES
- Line-speed AES128 over-the-air encryption
- Storm / flood protection
- Password protection
- Protocol messages encryption
- Secure command-line access via SSH protocol
ENVIRONMENTAL
- Outdoor Units:-40..+60C, 100% humidity, condensing
- Indoor Unit:0..+40C, 95% humidity, non-condensing
