Cisco Meraki MR24 Dual-Radio, 3x3 MIMO 802.11n Access Point
The Cisco Meraki MR24 Access Point is an enterprise class, dual-concurrent 3x3 MIMO 802.11n access point designed for high-density deployments in large offices, schools, hospitals and hotels that require premium performance. Only available with Enterprise Cloud Controller.
Features and Benefits
Highlights
- High capacity, dual concurrent 3x3 MIMO radios: over 900 Mbps of combined throughput
- Enhanced transmit power and receive sensitivity designed for maximum client coverage
- Self-healing, zero-configuration mesh operation
- Integrated application-aware traffic shaping, spectrum analysis and cloud management
- Powered by energy-efficient, standard 802.3af Power over Ethernet (PoE) or DC plug
Proven Performance
The Meraki MR24 has been tested by the Tolly Group, a premier third-party IT test lab, and found to demonstrate superior throughput and signal strength when compared against Cisco's flagship 802.11n access point.
“The Meraki MR24 clearly and consistently outperformed the Cisco Aironet 3502, delivering higher throughput in all test scenarios and better coverage in most locations in the office environment we tested,” said Kevin Tolly, founder of the Tolly Group. “While the Cisco topped out at 191 Mbps, the MR24 achieved an astonishing 242 Mbps, opening new doors for high performance wireless deployments.”
Centralized Management
Multi-Site Management Manage multiple branch offices or buildings from a single management interface.
Meraki Dashboard™ Access the Meraki Cloud Controller through a web browser from anywhere in the world to securely monitor and administer the wireless network in real-time.
Role-Based Administration Configure multiple administrator accounts with read-only or full privileges.
High Availability Redundant systems in multiple data centers around the world provide a failover time for the Meraki Cloud Controller that is measured in seconds.
Test Tools Check the connectivity and performance of a wireless network, simulate user authentication, and more without setting foot on-site or using a command line interface.
Dual 3x3 MIMO 802.11n radios, up to 900 Mbit/sec
The MR24 is the first 3x3 MIMO enterprise access point to use three spatial streams. This advanced radio technology enables the MR24 to provide up to 450 Mbit/sec of throughput per radio, for a combined 900 Mbit/s. Technologies like transmit beamforming and enhanced receive sensitivity give the MR24 increased range compared to typical enterprise-class access points, resulting in fewer required APs for a given deployment.
Application-aware traffic shaping
The MR24 includes an integrated layer 7 packet inspection, classification, and control engine. Administrators can use application- based traffic shaping to prioritize mission critical applications and set limits on recreational traffic, e.g. peer-to-peer and video streaming.
Automatic cloud-based RF optimization with spectrum analysis
The MR24’s sophisticated, automated RF optimization means that there is no need for the dedicated hardware and RF expertise typically required to tune a wireless network. An integrated spectrum analyzer monitors the airspace for neighboring WiFi devices as well as non-802.11 interference, such as microwave ovens and Bluetooth headsets.
Integrated enterprise security and guest access
The MR24 features integrated, easy-to-use security technologies to provide secure connectivity for employees and guests alike. Advanced security features such as AES hardware-based encryption and WPA2-Enterprise authentication with 802.1x and Active Directory integration provide wire-like security while still being easy to configure. One-click guest isolation provides secure, Internet-only access for visitors.
Low profile, environmentally friendly design
Despite its robust power and feature set, the MR24 is packaged in a sleek, low profile enclosure that blends seamlessly into any environment. In addition to looking great, the MR24 is earth friendly: Meraki has eliminated excess packaging and documentation, and 90% of the access point materials are recyclable.
High performance mesh
The MR24’s advanced mesh technologies like multi-channel routing protocols and multiple gateway support make it possible to cover hard-to-wire areas while maintaining high performance. Mesh also improves network reliability - in the event of a switch or cable failure, the MR24 will automatically revert to mesh mode, providing continued gateway connectivity to clients.
|
|
|
|
Usage
|
Value-oriented WLAN Small branch, teleworker, home office |
Performance oriented WLAN Enterprise, campus, healthcare |
Highest performance, highest capacity WLAN High speed, and high density campus and enterprise |
Radio specification
|
1 × 802.11b/g/n radio 300 Mbit/s max rate 2x2 MIMO, beamforming |
2 × 802.11b/g/n radios 600 Mbit/sec max rate 2x2 MIMO, beamforming |
2 × 802.11b/g/n radios 900 Mbit/sec max rate 3x3 MIMO with 3 streams, beamforming |
Interface
|
1 × Gigabit and 1 × 10/100 Mbps Ethernet ports |
1 × Gigabit Ethernet port |
1 × Gigabit Ethernet port |
Power
|
802.3af Power over Ethernet DC power adaptor |
802.3af Power over Ethernet DC power adaptor |
802.3af Power over Ethernet DC power adaptor |
Physical design
|
Low-profile industrial design Wall and desktop mounting |
Low-profile industrial design Wall, desktop, and ceiling drop mounting (UL2043 Plenum rated) |
Low-profile industrial design Wall, desktop, and ceiling drop mounting (UL2043 Plenum rated) |
Performance features
|
Priority Voice, Power Save (802.11e/WMM) Enterprise-grade CPU Hardware-accelerated encryption |
Priority Voice, Power Save (802.11e/WMM) Enterprise-grade CPU Hardware-accelerated encryption High-density support Band steering |
3-stream, 3x3 MIMO Priority Voice, Power Save (802.11e/WMM) Enterprise-grade CPU Hardware-accelerated encryption High-density support Band steering |
Mesh networking
|
Basic mesh |
High performance multi-radio mesh |
Very high performance multi-radio mesh |
Note: Please refer to the Meraki Indoor Access Points Comparison Table for more information.
Cisco Meraki MR24 Technical Specifications
Radios
- One 802.11b/g/n and one 802.11a/n radio
- Dual concurrent operation in 2.4 and 5 GHz bands
- Max throughput rate 900 Mbit/s
Operating Bands
- FCC (US)
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.725 -5.825 GHz (UNII-3)
EU (Europe)
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350, 5.470-5.725 GHz (UNII-2)
802.11n Capabilities
- 3x3 multiple input, multiple output (MIMO) with three spatial streams
- Maximal ratio combining (MRC)
- Beamforming
- 20 and 40 MHz channels
- Packet aggregation
- Cyclic shift diversity (CSD) support
Power
- Power over Ethernet: 24 - 57 V (802.3af compatible)
- 12V DC
- Power consumption: 10.5 W max
- Power over Ethernet injector and DC adapter sold separately
Mounting
- All standard mounting hardware included
- Desktop
- Wall mount
- Ceiling tile rail (9/16, 15/16 or 1 ½" flush or recessed rails)
- Assorted cable junction boxes
Physical Security
- Security screw included
- Kensington lock hard point
- Anti-tamper cable bay
- Concealed mount plate
Environment
- Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
- Humidity: 5 to 95% non-condensing
Physical Dimensions
- 8.6" x 6.2" x 1.4" (218 mm x 157 mm x 36 mm) not including deskmount feet or mount plate
- Weight: 22 oz (0.62 kg)
Antenna
- Integrated omni-directional antennas
- Gain: 3 dBi @ 2.4 GHz, 5 dBi @ 5 GHz
Interfaces
- 1 × 100/1000Base-T Ethernet (RJ45) with 48V DC 802.3af PoE
- 1 × DC power connector (5mm x 2.1mm, center positive)
Security
- Integrated policy firewall (Identity Policy Manager)
- 24 × 7 Wireless Intrusion Detection
- Guest Isolation
- WEP, WPA
- WPA2-PSK
- WPA2-Enterprise with 802.1X
- TKIP and AES encryption
- VLAN tagging (802.1Q)
Quality of Service
- Wireless Quality of Service (WMM/802.11e)
- Advanced Power Save (U-APSD)
- DSCP (802.1p)
LED Indicators
- 4 signal strength
- 1 Ethernet connectivity
- 1 power/booting/firmware upgrade status
Regulatory
- FCC (US)
- IC (Canada)
- CE (Europe)
- IEC / EN60950-1
- UL2043 (Plenum rating)
- RoHS
Certification
Warranty
- Lifetime hardware warranty with advanced replacement included
Note: Please refer to the Meraki Indoor Access Points Comparison Table for more information.