Ruckus ZoneFlex R510 Unleashed Dual-Band 802.11ac Wave 2 2X2:2 Smart Wi-Fi Access Point (9U1-R510-WW00)
The Ruckus 9U1-R510-WW00 enables controller-less Wi-Fi architecture for small business environments with superior performance, lower costs and simplified management. Separate controllers and access point licenses are no longer needed, significantly reducing upfront costs. The set-up is also easy, thanks to a simplified web interface that helps businesses configure Wi-Fi in just 60 seconds.
Ruckus 9U1-R510-WW00 Key Features
- 802.11ac Multi-User MIMO (MU-MIMO)
- Dual-band concurrent (5Ghz/2.4GHz)
- BeamFlex+ (PD-MRC) smart antenna, with support for 64 unique antenna patterns enables up to 4 dB of additional gain and up to 10 dB of additional interference mitigation
- Up to an additional 4dB BeamFlex gain / 10dB interference mitigation / 3dBi physical antenna gain
- Automatic interference mitigation optimised for high-density environments
- 802.11ac standard Tx Beamforming
- Standard 802.3af Power over Ethernet (PoE)
- Two 10/100/1000 Ethernet ports, one with 802.3af Power over Ethernet (PoE)
- USB Port for IoT technologies
- Gateway mode with NAT and DHCP services
- IP multicast video streaming support
- Advanced QoS packet classification and automatic priority for latency-sensitive traffic
- Dynamic, pre-user rate-limiting for hotspot WLANs
- WPA-PSK (AES), 802.1X support for RADIUS and Active Directory
The Ruckus ZoneFlex R510 Unleashed delivers high-performance and reliable 802.11ac wireless networking with MU-MIMO (Multi-User Multiple-Input Multiple-Output) capability. MU-MIMO helps boost network throughput by serving multiple clients simultaneously and also benefiting non-Wave 2 clients, thus improving overall network performance.
The R510 Unleashed, through its USB port, also enables IoT readiness for technologies like BLE, which helps drive business efficiencies from both a revenue and cost perspective. It does this with existing 802.3af power, obviating the need for expensive, capital-intensive switch upgrades.
Each ZoneFlex R510 Unleashed integrates Ruckus-patented BeamFlex+, a software-controlled, high gain antenna design that continually forms and directs each Wi-Fi packet over the best performing signal path. Using dual-polarized antennas, the R510 Unleashed adapts in real time to anticipate hand-held device movement and rotation ensuring consistent performance.
Peplink 9U1-R510-WW00 Technical Specifications
Physical Characteristics
- Power: DC Input: 12 VDC 1.0A, Power over Ethernet 802.3 af
- Physical Size: 16.8 cm (L), 16.5 cm (W), 4.1 cm (H), 6.6 in (L), 6.5 in (W), 1.6 in (H)
- Weight: 350gms (0.772 lbs)
- Ethernet Ports: 2 auto MDX, auto-sensing 10/100/1000 Mbps, RJ-45, POE port (on one port)
- Mounting Options: Electrical wall box; Standard US and EU single gang wall jack, Optional bracket for offset & wall mount
- Lock Options: Hidden latching mechanism, Kensington Lock Hole, T-bar Torx, Bracket (902-0108-0000) Torx screw & padlock (sold separately)
- Environmental Conditions: Operating Temperature: 0°C - 50°C, Operating Humidity: 10% - 95% non-condensing
- Power Draw: 12 VDC Input, Idle: 4.4W, Typical: 7.1W, Peak: 11.9W. Power over Ethernet Input, Idle: 4.7W, Typical: 7.5W, Peak: 12.6W
- USB PORT: USB 2.0, Type A connector, Ideal for BLE dongles and sensors
Performance and Capacity
- Concurrent Stations: Up to 512 clients per AP
- Simultaneous VoIP Clients: Up to 30 clients per AP
RF
- Antenna: an Adaptive antenna that provides up to 64 unique antenna patterns per radio, Full omnidirectional polarisation diversity
- Physical Antenna Gain: Up to 3dBi
- Beamflex SINR TX Gain: Up to 4 dB
- Beamflex SINR RX Gain: 3-5 dB (PD-MRC)
- Interface Mitigation: Up to 10 dB
- Minimum RX Sensitivity: Up to -103 dBm
Management
- Deployment Options: Ruckus Unleashed controller-less
- Configuration: Basic SNMP support
WiFi
- Standards: IEEE 802.11a/b/g/n/ac, 2.4GHz and 5GHz
- Supported Data Rates: 802.11n/ac: 6.5Mbps – 173.4Mbps (20MHz), 13.5Mbps – 400Mbps (40MHz), 29.3Mbps – 867Mbps (80MHz), 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps, 802.11b: 11, 5.5, 2 and 1 Mbps, 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
- Radio Chains: 2x2
- Spatial Streams: SU-MIMO: Up to 2 streams, MU-MIMO: Up to 2 streams
- Channelisation: 20MHz, 40MHz, 80MHz
- RF POWER OUTPUT (Aggregate): 26 dBm for 2.4GHz†, 25 dBm for 5GHz†
- Operating Channels: 2.4GHz channels* : 1-13, 5 GHz channels* : 36-64, 100-140, 149-165
- Frequency Band: IEEE 802.11 b/g/n: 2.4 – 2.484 GHz, IEEE 802.11a/n/ac: 5.15 – 5.25 GHz; 5.25 – 5.35 GHz; 5.47 – 5.725 GHz; 5.725 – 5.85 GHz
- Power Save: Supported
- Wireless Security: WPA-PSK, WPA-TKIP, WPA2, AES, 802.11i, Authentication via 802.1X with the local authentication database, support for RADIUS, LDAP, and ActiveDirectory
- Certifications: U.S., Europe, Australia, Brazil, Canada, Chile, China, Colombia, Costa Rica, Hong Kong, India, Indonesia, Israel, Japan, Korea, Malaysia, Mexico, New Zealand, Peru, Philippines, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand, UAE, Vietnam. WEEE/RoHS compliance, EN-60601-1-2 (Medical), Wi-Fi Alliance, EN50121-1 Railway EMC, EN50121-4 Railway Immunity, IEC 61373 Railway Shock & Vibration, UL 2043 plenum rated, 5GHz UNII-1 (2014)