Ruckus ZoneFlex R610 Unleashed Dual-Band 802.11ac Wave 2 3X3:3 Smart Wi-Fi Access Points (9U1-R610-WW00)
The Ruckus 9U1-R610-WW00 enables controller-less Wi-Fi architecture for small business environments with superior performance, lower costs and simplified management. Separate controllers and access point licenses are no longer needed, significantly reducing upfront costs. Set-up is also easy, thanks to a simplified web interface that helps businesses configure Wi-Fi in just 60 seconds.
Ruckus 9U1-R610-WW00 Key Features
- 802.11ac Multi-User MIMO (MU-MIMO)
- Dual-band concurrent (5Ghz/2.4GHz)
- BeamFlex+ (PD-MRC) smart antenna, with support for up to 1024unique antenna patterns per access point, enables up to 4dB of additional gain and up to 10dB of additional interference mitigation
- 80+80/160MHz capable
- 802.11ac standard Tx Beamforming
- Automatic interference mitigation optimised for high-density environments
- Band balancing and airtime fairness support
- Admission control/load balancing
- Standard 802.3af/at Power over Ethernet (PoE)
- Ethernet Port Link Aggregation (LACP)
- Two 10/100/1000 Ethernet ports, one with 802.3af/at Power over Ethernet (PoE)
- USB port for IoT technologies
The R610 Unleashed delivers high-performance and reliable 802.11ac wireless networking with MU-MIMO (Multi-User Multiple-Input Multiple-Output) capability. MU-MIMO helps boost network throughput by serving multiple clients simultaneously and also benefiting non-Wave 2 clients, thus improving overall network performance.
The R610 Unleashed, through its USB port, also enables IoT readiness for technolo- gies like BLE, to help customers take advantage of upcoming IoT technologies.
Each R610 Unleashed integrates Ruckus-patented BeamFlex+, a software-controlled, high gain antennas that continually forms and directs each Wi-Fi packet over the best performing signal path.
Using dual-polarised antennas, the R610 Unleashed adapts in real time to anticipate hand-held device movement and rotation ensuring consistent performance.
Peplink 9U1-R610-WW00 Technical Specifications
Physical Characteristics
- Power: DC Input: 12 VDC 1.0A, Power over Ethernet 802.3 af/at, 802.3af mode feature: Limits 2.4GHz to 2x3 (2-chain transmit at 21dBm aggregate power, 3-chain receive), Turns off USB port, Turns off 1 Ethernet port
- Physical Size: 20.1cm (L), 19.5cm (W), 5.1cm (H)
- Weight: 578g ( 1.3 lb)
- Ethernet Ports:
- 2 auto MDX, auto-sensing 10/100/1000 Mbps, RJ-45, POE port (on one port), Link Aggregation (LACP)
- Mounting Options: Electrical wallbox; Standard US and EU single gang wall jack, Optional bracket for offset & wall mount
- Lock Options: Hidden latching mechanism, Kensington Lock Hole, T-bar Torx
- Environmental Conditions: Operating Temperature: 0°C - 40°C, Operating Humidity: 10% - 95% non-condensing
- Power Draw: 12 VDC Input, Idle: 5.7W, Typical 10.5W, Peak: 19.1W. Power over Ethernet Input, Idle: 5.7W, Typical: 10.4W, Peak: 18.8W
- USB PORT: USB 2.0, Type A connector, Ideal for BLE dongles and sensors
Performance and Capacity
- Phy Data Rates: Up to 600 Mbps (2.4GHz), Up to 1300 Mbps (5GHz)
- Maximum APs: 25 access points per Unleashed network
- Concurrent Stations: 512 clients per Unleashed network
- Simultaneous Voip Clients: 30 clients per AP
RF
- Antenna: Full omnidirectional polarisation diversity
- Physical Antenna Gain: Up to 3dBi
- Beamflex SINR TX Gain: Up to 6 dB
- Beamflex SINR RX Gain: 3-5 dB (PD-MRC)
- Interface Mitigation: Up to 15 dB
- Minimum RX Sensitivity: Up to -100 dBm
Management
- Deployment Options: Ruckus Unleashed controller-less
- Configuration: Basic SNMP support
WiFi
- Standards: IEEE 802.11a/b/g/n/ac, 2.4GHz and 5GHz
- Supported Data Rates: 802.11n/ac: 6.5Mbps – 260Mbps (20MHz), 13.5Mbps – 600Mbps, (40MHz), 29.3Mbps – 1300Mbps (80MHz), 867Mbps (160MHz1), 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps, 802.11b: 11, 5.5, 2 and 1 Mbps, 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
- Radio Chains: 3x3
- Spatial Streams: 3 Streams
- Channelisation: 20MHz, 40MHz, 80MHz, 160MHz capable
- RF POWER OUTPUT (Aggregate): 28 dBm for 2.4GHz†, 27 dBm for 5GHz†
- Operating Channels: US/Canada: 1-11, Europe ( ETSI X30): 1-13, Japan X41: 1-13, 5 GHz channels: Country dependent
- Frequency Band: IEEE 802.11 b/g/n: 2.4 – 2.484GHz, IEEE 802.11a/ac: 5.15 – 5.25GHz; 5.25 – 5.35GHz; 5.47 –5.725GHz; 5.725 – 5.85GHz
- Power Save: Supported
- Wireless Security: WPA-PSK, WPA-TKIP, WPA2, AES, 802.11i, Authentication via 802.1X with the local authentication database, support for RADIUS, LDAP, and ActiveDirectory
- Certifications: U.S., Europe, Australia, Brazil, Canada, Chile, China, Colombia, Costa Rica, Hong Kong, India, Indonesia, Israel, Japan, Korea, Malaysia, Mexico, New Zealand, Peru, Philippines, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand, UAE, Vietnam. WEEE/RoHS compliance, EN-60601-1-2 (Medical), Wi-Fi Alliance, EN50121-1 Railway EMC, EN50121-4 Railway Immunity, IEC 61373 Railway Shock & Vibration, UL 2043 plenum rated, 5GHz UNII-1 (2014)