Ruckus ZoneFlex T710 Unleashed Dual-Band 4X4:4 802.11AC Wave 2 Outdoor Smart (9U1-T710-WW01)
The Ruckus 9U1-T710-WW01 enables controller-less Wi-Fi architecture for small business environments with superior performance, lower costs and simplified management. Separate controllers and access point licenses are no longer needed, significantly reducing upfront costs. Set-up is also easy, thanks to a simplified web interface that helps businesses configure Wi-Fi in just 60 seconds.
Ruckus 9U1-T710-WW01 Key Features
- 802.11ac Multi-User MIMO (MU-MIMO)
- Concurrent dual-band (5GHz/2.4GHz) support
- 2,533Mbps maximum PHY rate (1733Mbps in 5GHz; 800Mbps in 2.4GHz
- BeamFlex+ (PD-MRC) smart antenna, with support for 4,000+ unique antenna patterns, enables up to 4dB of additional gain and up to 10dB of additional interference mitigation
- Antenna options: omnidirectional and 120x30 degrees sector
- Unmatched Rx sensitivity down to -104dBm
- Improved Maximum Ratio Combining (MRC) for best-in-class receive sensitivity
- 802.11ac standard Tx Beamforming
- Space-Time Block Coding for increased handset performance
- Low-Density Parity Check (LDPC) for increased data throughput at all ranges
- 256-QAM support on 5GHz and 2.4GHz
- Backward compatible with legacy 802.11 clients
- Dedicated dual-band RF monitor enabling enhanced performance while providing Zero-Wait DFS capability
- 2 10/100/1000 Ethernet ports
Featuring BeamFlex+ adaptive antenna technology, the ZoneFlex T710 Unleashed offers a substantial increase in performance and range by optimizing antenna coverage on a per client, per transmission basis. BeamFlex+ additionally mitigates co-channel interference by directing Wi-Fi signals where they are needed instead of towards neighbouring access points. The T710’s BeamFlex+ adaptive antenna system is also equipped with dual polarisation antennas, allowing the access point to adapt to the physical orientation of client devices and maximize uplink performance.
With throughput capacities of 800Mbps (2.4GHz) and 1733Mbps (5GHz), the ZoneFlex T710 Unleashed supports the highest available throughput for Wi-Fi clients. 802.11ac Multi-User MIMO (MU-MIMO) support allows the T710 Unleashed to simultaneously transmit to multiple MU-MIMO capable devices, drastically improving airtime efficiency, overall throughput, and availability. The T710 Unleashed is compatible with a wide array of MU-MIMO, SU-MIMO and legacy Wi-Fi clients.
The ZoneFlex T710 Unleashed can function either as a standalone AP or as part of centrally-managed Wireless LAN.
Peplink 9U1-T710-WW01 Technical Specifications
Physical Characteristics
- Power: PoE: 802.3at, af, AC Input: 100-250 Vac, 50/60 Hz
- Physical Size: 31.7 cm (L), 24.1 cm (W), 9.5 cm (H)
- Weight: 6.5 lbs
- RF:
- Adaptive antennas: 4,000+ unique antenna patterns, polarisation diversity
- Maximum Transmit Power
- 28 dBm on 2.4 GHz; 28 dBm on 5 GHz
- Physical antenna gain: Omni 3 dBi
- (2.4 and 5GHz) Sector - 6dBi (2.4GHz), 8dBi (5GHz)
- BeamFlex SINR Tx gain: up to 6 dB
- BeamFlex SINR Rx gain: up to 3-5 dB
- Interference mitigation: up to 15 dB
- Minimum Rx sensitivity: -104 dBm
- Ethernet Ports:
- 2 Ethernet ports, auto MDX, auto-sensing, 10/100/1000 Mbps, RJ-45
- Power over Ethernet (802.3at) with Category 5/5e/6 cable
- Link Aggregation (LACP)
- SFP port to support fibre backhaul
- Environmental Conditions:
- Operating Temperature:
- -40°F (-40°C) to 149°F (65°C)
- Operating Humidity: up to 95% non-condensing
- Power Draw (When PoE is not used):
- 5.5W (minimum)
- 10.4W (typical)
- 25W peak
Performance and Capacity
- Concurrent Stations: Up to 512
- Voice Calls: Up to 30
- Phy Data Rates:
- Up to 800 Mbps (2.4GHz)
- Up to 1733 Mbps (5GHz)
Network Architecture
- IP: IPv4, IPv6, dual-stack
- VLANs:
- 802.1Q (1 per BSSID or dynamic, per user, based on RADIUS)
- Port-based
- 802.1X for wired ports
Management
- Deployment Options:
- Locally managed using Unleashed Web UI, Mobile App, and Multi-Site Manager
Multimedia and quality of Service
- 802.11e/WMM: Supported
- Software Queues: Per WLAN priority (2), Per traffic type (4), per client
- Traffic Classification: Automatic, heuristics and TOS based or VLAN-defined
- Rate Limiting: Dynamic per-user or per-WLAN
WiFi
- Standards: IEEE 802.11a/b/g/n/ac
- Supported data rates:
- 802.11ac: 29.3 Mbps – 1733 Mbps (80MHz)
- 802.11n: 6.5 Mbps – 216.7 Mbps (20MHz) 13.5 Mbps – 800 Mbps (40MHz)
- 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
- 802.11b: 11, 5.5, 2 and 1 Mbps
- 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
- Radio Chains/ Streams: 4x4:4
- MIMO
- SU-MIMO — Up to 4 streams
- MU-MIMO — Up to 3 streams
- Channelisation: 20 MHz, 40 MHz, and/or 80 MHz
- Frequency Band:
- IEEE 802.11ac: 5.15 – 5.85 GHz
- IEEE 802.11a/n: 5.15 – 5.85 GHz
- IEEE 802.11b: 2.4 – 2.484 GHz
- BSSIDs:
- Power Save: Supported
- Certifications:
- WEEE/RoHS compliance
- EN 60601-1-2 Medical
- Wi-Fi Alliance certified
- UL 2043 plenum rated
- Subway And Railroad Certifications:
- EN50121-1 EMC
- EN50121-4 Immunity
- IEC 61373 Shock & Vibration