The EXRE-1000 Power Over Ethernet Gigabit (PoE) Range Extender is a unique product that doubles the standard range of PoE, from the baseline 100 meters to a full 200 meters, all while enabling full gigabit speed. It can be used both as a standalone product, to extend the reach of PoE installations, and as a complement to Extricom's award-winning Wireless LAN (WLAN) System.
When used in WLAN implementations, the EXRE-1000 enables any Extricom UltraThin Access Point to be connected using standard Cat5e/6 cable up to 200 meters from the Extricom WLAN Switch. Continuing Extricom tradition of deployment simplicity, the EXRE-1000 PoE Range Extender sits in-line on the Ethernet cable and does not require an external power feed. The Range Extender receives its power from the original PoE injector in the switch or from a PoE injector/power supply, while it simultaneously injects PoE to the extended cable segment.
Specifications
Standards
IEEE 802.3x, full/half duplex
Ethernet
2 x 100/1000 BaseT Ethernet with IEEE 802.3af PoE (out of band, 8 wires)
LAN
Regulatory Compliance (in-process/planned)
IEC 60950-1
Safety
- FCC part 15 Sub part B
- EN 300386
- VCCI Tech. Req., V-3/2001.04
- EMC
Miscellaneous
- EXRE-1000 PoE Range Extender
- Ordering Information
Physical Properties
Built-in mount holes on each side
Installation options
- 6.3 x 1.5 x 4.2
- 161 x 38 x 107 mm
- Dimensions (W x H x D)
Weight
LEDs
Power Consumption
1.5 Watts
Environmental
- Temperature: 0°C to 45°C (32°F to 113°F)
- Humidity: 0% to 90%, non-condensing
Operational
- Temperature: - 20°C to +70°C (-4°F to 158°F)
- Humidity: 0% to 90%, non-condensing
Features and Benefits
The EXRE-1000 doubles the standard range of PoE, from 100 to 200 meters.
Double the Range of Power Over Ethernet
The Range Extender is powered by the incoming PoE, enabling simple in-line installation. It uses the incoming PoE to then inject a re-energized signal to the line.
- No Power Supply Needed
- Full gigabit Ethernet speed
- Gigabit Ethernet