EnGenius EnTurbo/EnJet Outdoor 5 GHz 11ac Wave 2 PtP Wireless Bridge (ENS500-AC)
The EnGenius ENS500-AC features Time Division Multiple Access, cuts through RF-congested environments within Point-to-Point/MultiPoint applications. EnJet enabled the ENS500-AC assigns time slots to each station, providing faster and more stable performance and avoiding the hidden node issue.
EnWiFi is an app used for configuring and managing your EnGenius wireless APs. Easily install, configure and manage ENS500-AC, view the status of your EnGenius wireless network at a glance, quickly identify healthy or offline wireless access point.
EnGenius ENS500-AC Key Features
- EnJet technology that cuts through RF-congested environments within point-to-point/multipoint applications.
- 11ac Wave 2 wireless speeds up to 867 Mbps on 5 GHz
- High 26 dBm transmit power extends Wi-Fi to yard or building-to-building.
- MU-MIMO improves performance & increases user device capacities.
- Beamforming optimizes antenna signal, reception & reliability for clients.
- IP55-Rated weatherproof & dustproof housing
- GigE PoE port & adapter included for placement where power is limited. Use the EnStationAC’s secondary PoE pass through Gigabit port to power an additional PoE-compliant device such as an IP surveillance camera.
- High Gain 19 dBi Integrated Directional Antennas extends wireless networks up to 5 miles point-to-point. [Model Number: EnStationAC (EnJet) and EnStation5-AC (EnJet) ]
- High Gain 14 dBi Integrated Directional Antennas extends wireless networks up to 2 miles point-to-point. [Model Number: ENS500-AC (EnJet)] Two detachable, 5 dBi 360° SMA-type antenna. [Model Number: ENS500EXT-AC (EnJet)]
- 3-Axis pivoting arm locks for precise alignment. [Model Number: EnStationAC (EnJet) and EnStation5-AC (EnJet)]
- Includes a suite of advanced AP management & security features
- Flexible Operation Modes: AP, Client Bridge & WDS
- Simple, Intuitive interface via EnWiFI app for local AP configuring & monitoring.
- Remotely & centrally manage via EnGenius Managed Switches, SkyKey Mini-controller or ezMaster™ software
Outdoor Access Points
Provide broad-reaching, fast 11ac Wave 2 access to users in a variety of settings. EnJet™ Outdoor APs are flexible and small enough for use in either indoor or outdoor environments. Achieve high-powered, long-range connections with integrated or detachable antenna options.
Outdoor Long-Range Bridges
Extend the wireless network in locations where cabling is not possible or practical while eliminating the expense of extended cable runs. Connect a secondary device such as an IP surveillance camera or access point for greater deployment flexibility.
Deliver precise short and long-range point-to-point links in settings such as:
- Between Buildings
- Across Large Campuses & Stadiums
- Over Vast Acreage: Parks, Golf Courses, Ranches
- City Blocks, Parking Lots & Marinas
- In Sizeable Indoor Structures: Distribution Centers & Arenas
PoE Supports Flexible Power Options
Connect and power EnJet™ Outdoor APs and Bridges via their dual-PoE Gigabit ports and included PoE Adapter for placement in locations where power outlets are unavailable such as on roofs, poles or other remote areas.
Flexible Operation & Configuration Options
Access Point, Client Bridge, and WDS mode configurations broaden the Outdoor APs and Bridge’s adaptability to your network needs. With multiple operation modes, these flexible devices offer versatility in point-to-point or point-to-multipoint deployments.
Optimal Performance in Harsh Environments
EnJet™ Outdoor APs and Bridges are designed to perform in harsh conditions and feature ruggedized IP55-rated enclosures. Ensure your network operates in extreme outdoor climates and indoor industrial environments where temperature is a factor. EnJet™ is protected from prolonged exposure to sunlight, cold, frost, snow, rain, hail, heat and humidity.
EnGenius ENS500-AC Technical Specifications
General
- Standards: 802.11ac Wave 2
- Frequency: 5 GHz
- Max. Data Rate: 867 Mbps
- Streams: 2 x 2:2
- Transmit Power: 26 dBm
- Ethernet Ports: 2x Gigabit PoE
- Power-Over-Ethernet: 24V Propriety PoE
- Power Consumption (Peak): 6.3W
- Antenna:
- 14 dBi
- Directional (Integrated)
- Ingress Protection Rating: 55
Standards
- IEEE802.11a/n/ac on 5 GHz
Processor
Antenna
- 2 x 14 dBi Directional Integrated
Physical Interface
- 2 x 10/100/1000 Gigabit Ethernet Ports
- Reset Button
LED Indicators
- Power
- LAN 1
- LAN 2
- WLAN
- Signal
Power Source
- Power-over-Ethernet: Proprietary 24V PoE
- IEEE 802.11e Compliant Source
- Active Ethernet (PoE)
Maximum Power Consumption
Surge Protection
- Line to Line: 1 KV
- Line to Ground: 2 KV
ESD Protection
Wireless & Radio Specifications Operating Frequency
Operation Modes [ EnJet Disable ]
- Access Point Mode (AP mode)
- Client Bridge Mode (CB Mode)
- WDS: WDS AP, WDS Bridge, WDS Station
Operation Modes [ EnJet Enable ]
- Access Port Mode (AP Mode)
- Client Bridge Mode (CB Mode)
- WDS: WDS AP and WDS Station
Frequency Radio
- 5 GHz: 5180 MHz~5260 MHz, 5280 MHz~5320 MHz, 5500 MHz~5745 MHz, 5765 MHz~5805 MHz
Transmit Power
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
SU-MIMO
- Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2x2 VHT40 client devices
MU-MIMO
- Two (2) Spatial Stream Multi User (MU) MIMO for up to 867 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps)
- 5 GHz: Max 867 Mbps
- 802.11a: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
- 802.11a/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
- 802.11n/ac: 2x2 MIMO With 2 Streams
Channelisation
- 802.11ac Supports Very High Throughput (VHT)— VHT 20/40/80 MHz
- 802.11n Supports High Throughput (HT)—HT 20/40 MHz
- 802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation
- 802.11a/n: OFDM 16-QAM, 64-QAM
- 802.11ac: OFDM 16-QAM, 64-QAM, 256-QAM
Management Multiple BSSID
- Supports 8 SSIDs [EnJet Disable]
- Supports 1 SSID [EnJet Enable]
VLAN Tagging
- Supports 802.1q SSID-to-VLAN Tagging
- Management VLAN
- VLAN Pass-Through
Spanning Tree
- Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
- Complaint With IEEE 802.11e Standard
- WMM
SNMP
MIB
Management Features Deployment Options
- Stand-Alone (Individually Managed/EnWiFi App)
- Managed Mode (w/ezMaster/EWS Series Switch/ Skykey
Stand-Alone Management Features
- Auto Channel Selection
- Auto Transmit Power
- Wireless STA (Client) Connected List
- Guest Network (Support When EnJet Disabled)
- Fast Roaming (802.11k & 802.11r)
- Pre-Authentication (802.11i, 802.11x)
- PMK Caching (802.11i)
- RSSI Threshold
- Traffic Shaping
- VLANs for Access Point – Multiple SSIDs
- Backup/Restore Settings
- Auto Reboot
- E-Mail Alert
- Site Survey
- Save Configuration as Users Default
Control Features
- Operation Mode
- Distance Control (ACK Timeout)
- Multicast Supported
- WiFi Scheduler
- Client Traffic Status
- RADIUS Accounting
- Power Save Mode (U-APSD Support)
- CLI Support
- HTTPS
Wireless Security
- WPA2 PSK & Enterprise (AES)
- Hide SSID in Beacons
- MAC Address Filtering, Up to 32 MACs per SSID
- Wireless STA (Client) Connected List
- SSH Tunnel
- Client Isolation
Wireless Management Features (w/ezMaster & EWS Switch) (Available in AP Mode) (Monitor When EnJet Enabled) (Support When EnJet Disabed)
- AP Auto Discovery and Provisioning
- AP Auto IP Assignment
- AP Group Management
- Auto AP Rebooting
- AP Device Name Editing
- AP Radio Settings
- Traffic Shaping
- Fast Roaming (802.11k & 802.11r)
- Pre-Authentication (802.11i, 802.11x)
- PMK Caching (802.11i)
- RSSI Threshold
- AP Client Limiting
- Client Fingerprinting
- AP VLAN Management
- VLANs for AP - Multiple SSIDs
- Secured Guest Network
- Access Point Status Monitoring
- Wireless Client Monitoring
- Email Alert
- Wireless Traffic & Usage Statistics
- Real-Time Throughput Monitoring
- Visual Topology View
- Floor Plan View
- Map View
- Wireless Coverage Display
- Secure Control Messaging (SSL Certificate)
- Local MAC Address Database
- Remote MAC Address Database (RADIUS)
- Unified Configuration Import/Export
- Bulk Firmware Upgrade Capability
- Intelligent Diagnostics
- Kick/Ban Clients
- WiFi Scheduler
Temperature Range
- Operating: -4º F~140º F (-20º C~60º C)
- Storage: -22º F~176º F (-30º C~80º C)
Humidity (non-condensing)
- Operating: 90% or less
- Storage: 90% or less
Waterproof
Dimensions & Weights
- Weight: 0.65 lbs. (0.29 kg)
- Width: 3.93” (100 mm)
- Length: 7.20” (185 mm)
- Height” 1.08” (27 mm)
Package Contents
- ENS500-AC Outdoor Bridge
- PoE Adapter (EPA2406GP)
- Pole-Mounting Brackets
- Wall-Mount Screw Set
- Power Cord
- Quick Installation Guide
Certifications
Warranty