Security

• Highly secure narrow beamwidth antennas
• Secure Management software option provides HTTPS management access
• and RADIUS authentication (see Advanced Security datasheet) AES Encryption hardware option provides the ultimate level of full line-rate
• data protection (see Advanced Security datasheet)

Reliability

• Rigorous HALT/HASS testing; 28-Year MTBF
• Up to 99.999%, carrier-grade availability

Ease-of-Use

• Connects directly to standard network equipment
• All-outdoor, compact design
• Low voltage power cabling
• Rapid & flexible deployment
• Embedded web and SNMP based network management agent

Connectivity Ranges

• AR80 - Up to 5 Miles (8 km)
• AR80X - Up to 7 Miles(11.5 km)

Operating Mode

• 1000 Mbps full-duplex, 100 Mbps full-duplex, 1000/100 Mbps AdaptRate
• AdaptRate and AdaptPath Switching
• Normal operation: 1000 Mbps / Path fade mode: 100 Mbps / Secondary link: Dependant of user supplied product capability
• Switching time: < 50 milliseconds
• AdaptRate switch point: -57 dBm / -59 dBm
• AdaptPath switch point: Configurable

Data Rate

• 1000 Mbps: 1000 Mbps full duplex
• 100 Mbps: 100 Mbps full duplex
• 1000 Mbps: 1000 Mbps full duplex
• 100 Mbps: 100 Mbps full duplex

Latency - 1000 Mbps

• < 40 uSec

100 Mbps

• < 220 uSec

1000 Mbps

• < 40 uSec

100 Mbps

• < 220 uSec

Link Budget - 1000 Mbps

• 172 dB @ 10-12 BER
• 174 dB @ 10-6 BER

100 Mbps

• 183 dB @ 10-12 BER
• 185 dB @ 10-6 BER

1000 Mbps

• 172 dB @ 10-12 BER
• 174 dB @ 10-6 BER

100 Mbps

• 183 dB @ 10-12 BER
• 185 dB @ 10-6 BER

RF Interface

• 1000 Mbps
• 72.5 GHz/82.5 GHz (FDD), digitally modulated (BFSK) with forward error correction RS(204,188)
• 1.4 GHz bandwidth
• 256-Bit AES Encryption option (see Advanced Security datasheet for details)

100 Mbps

• Min. link distance 328 ft (100 m)

1000 Mbps

• 1.4 GHz bandwidth
• Min. link distance 1,312 ft (400 m)

100 Mbps

• 285 MHz bandwidth

Antenna - 1000 Mbps/100 Mbps

• External 12 in (31 cm) directional cassegrain
• Linear polarized (H/V), 44 dBi gain, 0.9° beam

1000 Mbps/100Mbps

• External 24 in (62 cm) directional cassegrain
• Linear polarized (H/V), 51 dBi gain, 0.4° beam

Ethernet Interfaces

• 1000base-SX with LC connectors - up to 270 m 62.5/125µm MMF, or 500 m 50/125µm MMF
• 10/100base-TX with RJ-45 connector (with integral surge suppressor) - up to 100 m CAT5 cable
• Maximum Ethernet frame length: 1632 bytes

Management

• Web-based (HTML) embedded management agent: setup, security, status, statistics, software update
• Secure Management Access (see Advanced Security datasheet for details)
• SNMP support: MIB-II and BridgeWave enterprise MIB
• Voltmeter test points: Receive Signal Level and Link Quality
• RADIUS Authentication, SysLog support

Power

• Supplied 100 – 240 VAC input, +24 VDC output, indoor rated power supply (0°C to +40°C). 45 watts max. consumption
• -48 VDC input option with user supplied power supply, 45 watts max. consumption
• Max. cable length: 650 ft (200 m) with 12AWG 400 ft (125 m) with 14AWG, stranded wires highly recommended (surge suppressor required)

Mount

• Fine-adjust pole mount: 3.5-4.5 in (8.9-11.4 cm) OD -- SCH40 or higher Fine-adjust pole mount: 3.5-4.5 in (8.9-11.4 cm) OD -- SCH40 or higher

Size

• Radio/antenna unit: 20 w * 14 h * 10 d (in) / 50 w * 36 h * 25 d (cm) Radio with antenna and mount: 24 w * 24 h * 20 d (in) / 62 w * 62 h * 50 d (cm)

Weight

• Radio with antenna and mount: 22 lbs (10 kg)
• Radio with antenna and mount: 38.5 lbs (17.5 kg)

Environmental

• Operating temperature: -33 to +55 °C (-27 to 131 °F)
• Operating altitude: 14,764 ft maximum (4,500 m)

Wind Loading

• 46 lbs. force @ 125 MPH 202 lbs. force @ 125 MPH

Regulatory

• Safety: UL Listed, CE Mark, EN60950, meets FCC 1.1310 general population RF MPE limits
• RF Certifications: EN302217 (2008-11), U.S. FCC Part 15.255

Install Kit

• Voltmeter test cable, power connectors