EnGenius 11ac Wave 2 Outdoor Dual-Band Wireless Access Point ENS620EXT
The EnGenius ENS620EXT is an 11ac Wave 2, MU-MIMO, Dual-Band Wireless AC1300 Outdoor Access Point. Reaching speeds to 867 Mbps on the 5 GHz and 400 Mbps on the 2.4 GHz frequency band, this feature-rich AP leverages advanced Wi-Fi and Beamforming antenna technology, maximizing performance and increasing outdoor or indoor network capacities. The AP is designed to operate in harsh environmental conditions and includes an IP55-rated weatherproof housing.
EnGenius ENS620EXT Key Features
- Wave 2 MU-MIMO Improves Performance & Expands User Capacities
- IP55-Rated Waterproof & Dustproof Housing Withstands Harsh Environments
- 11ac Dual-Radio Speeds to 867 Mbps on 5 GHz; to 400 Mbps on 2.4 GHz
- Beamforming Optimises Antenna Signal, Reception & Reliability
- GigE PoE-Compatible Port for Easy Placement Where Power Outlets are Scarce
- Four (4) External 5dbi High-Gain, 360° SMA-Type Antennas
- Combine GigE Ports via Link Aggregation for Maximum AP Bandwidth Capacity
- Band Steering Optimises Network Traffic Flow ; Fast Roaming
- Secures Seamless Connections
- Flexible Operation Modes: AP, Client Bridge or WDS
- Quickly View, Monitor & Reconfigure APs Locally or Remotely with EZ Controller™ Software
The ENS620EXT is easy to install in virtually any location with its included Power-over-Ethernet (PoE) injector for quick deployment regardless of its proximity to power outlets. The AP is an ideal wireless solution for indoor and outdoor residential and commercial applications
Higher Speeds for Multi-User Support
The ENS620EXT offers the next generation of 11ac Wave 2 speed and performance for wireless access points by increasing speeds and capacities. Support the newest 11ac Wave 2 Multi-User MIMO (MU-MIMO) smartphones, laptops, and other mobile devices with AC1300 network speeds for bandwidth-heavy applications. MultiMIMO sends multiple streams to several devices simultaneously expanding the total bandwidth and capacity of the network.
Exceptional Performance in Harsh Outdoor Climates
Designed for peak performance in harsh climates, the ENS620EXT features an IP55-rated weatherproof and dustproof enclosure ensuring it can withstand harsh outdoor and indoor environments where the temperature is a factor
11ac Wave 2: Future Proof, Crowd Proof Networks
The ENS620EXT allows administrators to utilise the most advanced Wi-Fi technology standard available while supporting the future of mobile technology for their users. The AP handles crowded outdoor client environments through its two spatial, MU-MIMO streams and Beamforming technology, which targets signals directly to devices, providing optimal signal and reception reliability for users.
Fast Roaming & Secure Guest Network Features Improve the Customer Experience
Configure multiple APs for Fast Roaming (802.11r & 802.11k); ensuring client authentication occurs seamlessly before client devices move to the next AP, providing continuous connectivity for devices in motion with fast, secure roaming. Establish Guest Networks to limit Internet resources for visitors while securing the network from sophisticated Trojans and malware that can use guest’s mobile devices to attack the network.
Powerful Connectivity Indoors and Out
The ENS620EXT is powerful enough to provide Wi-Fi connectivity approximately 3,000 square feet while its small footprint makes it flexible for both indoor and outdoor use. Place the AP near an exterior wall indoors and blanket both indoor and outdoor living areas with its wireless signal.
EnGenius ENS620EXT Technical Specifications
Standards
- IEEE 802.11b/g/n on 2.4 GHz
- IEEE802.11a/n/ac on 5 GHz
Antenna
- Four (4) External 5 dBi Dual-Concurrent Omni-Directional Antennas
- SMA-Type
Physical Interface
- 2 x 10/100/1000 Gigabit Ethernet Ports (Link Aggregation achieves 2 Gbps Throughput)
- 1 x Reset Button
LED Indicators
- 1 x Power
- 1 x LAN 1
- 1 x LAN 2
- 1 x 2.4 GHz
- 1 x 5 GHz
Power Source
- Power-over-Ethernet: Proprietary 24V PoE
- IEEE 802.11e Compliant Source
- Active Ethernet (PoE)
Max. Power Consumption
Surge Protection
ESD Protection
Wireless & Radio Specifications
- Operating Frequency
- Dual-Radio Concurrent 2.4 GHz & 5 GHz
Operation Modes
- Access Point Mode (AP mode)
- Client Bridge Mode (CB Mode)
- WDS: WDS AP, WDS Bridge, WDS Station
Frequency Radio
- 2.4 GHz: 2400 MHz ~ 2835 MHz
- 5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz
Transmit Power
- 2.4 GHz: 27 dBm
- 5 GHz: 27 dBm
Radio Chains/ Spatial Stream
SU-MIMO
- Two (2) Spatial Stream SU-MIMO up to 1267 Mbps to a single client
MU-MIMO
- Two (2) Spatial Stream MU-MIMO up to 1267 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps):
- 2.4 GHz: Max 400
- 5 GHz: Max 867
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 36, 48, 54
- 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
- 802.11b: Direct-Sequence Spread Spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
- 802.11n/ac: 2x2 MIMO with 2 Streams
Channelisation
- 802.11ac supports very high throughput (VHT)—VHT 20/40/80 MHz
- 802.11n supports high throughput (HT)—HT 20/40 MHz
- 802.11n supports very high throughput (VHT) under the 2.4 GHz radio—VHT (256-QAM)
- 802.11n/ac packet aggregation: AMPDU, ASPDU
Supported Modulation
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
- Multiple BSSID
- Supports 16 SSIDs (8 SSIDs per band)
VLAN Tagging
- Supports 802.1q SSID-to-VLAN Tagging
- Cross-Band VLAN Pass-Through
- Management VLAN
QoS (Quality of Service)
- Complaint with IEEE 802.11e Standard
- Band Steering
- RSSI Threshold
- Traffic Shaping
- Save Configuration as Default
- Auto-Transmit Power
- Auto-Channel Selection
- Site Survey
- PMK Caching
- PMK Caching
For more specifications, please see the attached datasheet