InfiNet InfiLINK 2x2 3.5 GHz R5000-Omx High-capacity 40/80/150/300 Mbps
Availability: In Stock
InfiNet InfiLINK 2x2 3.5 GHz R5000-Mmx High-capacity 40/80/150/300 Mbps
The InfiNet InfiLINK Wireless 2x2 family of products was among the very first radio solutions to introduce MIMO technology for Broadband Wireless Access, and has continued ever since to set new standards across the industry for throughput, spectrum optimisation, efficiency, Quality of Service and system reliability.
The InfiNet InfiLINK 2x2 3.5 GHz is a high-performance broadband wireless point-to-point solution designed to operate in the licensed 3.4 to 3.7 GHz frequency range. The various products within this family have been designed primarily to cater for the specific requirements of local authorities, service providers or other organizations that have purchased WiMAX licences. They enable them to deploy more efficient and scalable networks for data, video and voice, whilst at the same time offering up to five times the throughput of existing systems in this frequency range. This is achieved with even fewer network elements, thereby reducing the overall Whole-Life Cost of managing their networks.
The inherent features built into the InfiNet InfiLINK 3.5 GHz solutions are key enablers in licence-exempt backhauls for NCTV/IP surveillance systems, Wireless-ISP networks, high-capacity corporate connectivity and last-mile provisioning, as well as for backing up Free Space Optics (FSO) and microwave links.
Technical Features
Applications
- 4G/LTE/WiMAX BTS High-capacity backhaul
- WISP infrastructure backhaul and internet PoP for remote locations
- Building-to-building or LAN-to-LAN connectivity at Fast Ethernet speeds
- Redundant Cellular backhaul, multiple E1/T1 TDM & Ethernet/IP transport
- Cost-effective alternatives to legacy microwave links
- NLOS and nLOS configurations
- Reliable backup for fibre lines, high-speed FSO or millimetre- wave links
Product Key Features and Highlights
- Available in 3.4 to 3.7 GHz frequency bands
- High spectral efficiency 6.5 Bit/s/Hz
- Multiple Input - Multiple Output (MIMO 2x2) innovative technology
- "Pay as you grow" software upgradeable features
- High-capacity - up to 240 Mbps effective throughput
- Channel width: 3.5/5/7/10/14/15/20/28/30/40 MHz
- Operational distances in excess of 80 km
- LOS (Line-Of-Sight) and NLOS (Non-Line-of-Sight)
- Advanced Quality-of-Service Support
- Robust design
Solution Benefits
- Maximise your investment in the licensed 3.5Ghz spectrum by offering improved throughput, spectral efficiency and a wider range of services and applications
- Transmission in LOS, nLOS and NLOS configurations with up to 240 Mbps effective throughput
- Class-leading equipment span & reach
- Proven field reliability & robustness, based on InfiNet's well-known InfiLINK 2x2 product family
- Low cost entry and "pay as you grow" model to easily upscale capacity
- Simple integration into existing infrastructure
- Significantly reduced total cost of ownership (TCO)
- Ultra-low latency and jitter for optimal transmission of video and voice data
2x2 Technology
- MIMO 2x2 stands for Multiple Input / Multiple Output innovative technology and it requires the use of two antennas at both the transmitter and reciever to improve communication performance.
Recommended Applications
- High-capacity CCTV infrastructure backhaul
- 4G/LTE/WiMAX BTS High-capacity backhaul
- WISP infrastructure backhaul
- WISP Internet POP for remote areas
- Redundant Cellular backhaul, Ethernet/IP transport
- Reliable backup for fibre lines, high-speed FSO or millimetre- wave links
- A cost-effective alternative for legacy microwave links
- Ultra-high spectral efficiency backhaul
- LAN-to-LAN connectivity at Fast Ethernet speeds
InfiNet InfiLINK 2x2 3.5 GHz PRO
R5000-Mmx
- High-capacity 40/80/150/300 Integrated 22 dBi Dual-polarization Antenna Point-to-Point backhaul
- 40, 80, 150 and 240 Mbps throughput options (license upgradeable)
- Middle-to-long range (30+ km)
- Radio technology: MIMO 2x2 with OFDM 64/128
- Modulation types: BPSK ½ to QAM64 5/6
- Transmit power: up to 20 dBm
- Receiver sensitivity: -67 to -101 dBm
- Frequency bands: 3.4-3.7 GHz
- Channel bandwidth: 3.5/5/7/10/14/15/20/28/30/40 MHz
- 22 dBi dual-pol integrated antenna
- Center frequency adjustment step: 125 kHz
- Channel duplex: TDD
- Gigabit Ethernet port (10/100/1000 Base-T), RJ-45 connector
- Serial port (RS-232)
- Up to 30 Watts
- Consumption:110-240 VAC @ 50/60 Hz, 48 VDC
- Outdoor Unit (ODU):370 x 370 x 85 mm, 3.7 kg
- Indoor Unit (IDU-BS-G):140 x 45 x 40 mm, 0.3 kg
Radio
- Voice/RTP Aware Superpacketing - to minimize jitter and latency for multimedia applications
- Automatic Bitrate Control - to ensure a 100% stable link no matter how external conditions change
- Automatic Transmit Power Control - to track and keep optimal input signal level to maximize performance per each link and reduce overall interference within given transmit power and EIRP limitations
- Automatic Distance Learning - to optimize performance for any link distances from tens of meters to 100 km and above
- Channel Time Adjustment - to improve performance on heavily loaded links
- Spectrum Analyzer mode - for interference detection and avoidance
- Channel testing tools - channel performance measurement- advanced diagnostics
Management Features
Web-Interface - Basic Settings
- Channel diagnostics: spectrumanalysis, antenna alignment,channel throughput measurement unit and RF links monitoring
- Maintenance: firmware upgrade,license and configuration import/export
- Tech support diagnostic reports generation- command-line access
Command-Line Interface for In-Depth Configuration and Diagnostics Accessible via:
- Secure shell (SSH)
- Telnet- serial port
- Remote shell
SNMPv1 / SNMPv3 support (MIB II, private MIB)
Networking
- Ethernet-over-IP tunneling
- ARP protocol support
- MAC/IP filtering
- Fully-fledged Layer 2 switch:
- Transparent transport for any type of Ethernet traffic including MPLS, stacked VLANs, etc.
- Multiple switching groups
- Full VLAN support including Q-in-Q(IEEE 802.1q and 802.1ad)
- STP/rSTP support
- IGMP Snooping with Querrier mode- Trunk groups support
- RIPv2 / OSPFv2 /static routing
- Tunneling(Ethernet-over-IP, IP-over-IP)
- L2/L3 Firewall
- NAT(multipool, H.323-aware)
- DHCP client/server/relay
Quality-of-Service
With many QoS permutations, QoS implementation works transparently in the network based on IEEE802.1p standard as well as ToS/DiffServ, guaranteeing perfect performance under any load and lowest jitter/delays for priority traffic.
QoS Features:
- 16 priority queues
- IEEE 802.1p support
- IP TOS / DiffServ support
- Full voice support
- Traffic limiting (absolute, relative, mixed)
- Traffic redirection
MAC
- Dynamic adaptive Polling - Centralized marker grant mode- Dynamically takes into account channel activity- Permanent channel testing
- Pseudo-radio Interface - unique InfiNet Wireless feature to join InfiNet Wireless networks via 3rd party equipment (Wired Ethernet segments, IP clouds)
- Automatic over-the-air firmware upgrade
Standards Compliance
Radio
- FCC Part 90 pending
- EN 302 326-2 pending
EMC
- EN 301 489-1
- EN 301 489-17
Safety
RoHS
Security Features
- Line-speed AES128 over-the-air encryption
- Storm / flood protection
- Password protection
- Protocol messages encryption
- Secure command-line access via SSH protocol
Environmental
- Outdoor Units:-40..+60C, 100% humidity, condensing
- Indoor Unit:0..+40C, 95% humidity, non-condensing
Non-operating
5-95%