InfiNet InfiMAN 2x2 R5000-Lmc High-capacity External Antenna Subscriber Terminal
The InfiMAN 2x2 is the highest capacity Point-to-Multipoint solution available for unlicensed and licensed bands including 2.3 & 2.6 GHz, 4.9 & 6.0 GHz 6.0 & 6.4 GHz.
The innovative high-speed base stations and CPE models are available for both licensed and unlicensed bands. As an example, the base station units provide a high sector capacity of up to 240 Mbps and uses leading-edge radio protocols providing unrivalled spectral efficiency. Compared to traditional Point-to-Multipoint systems, both operating range and link reliability have increased significantly through the use of advanced Multiple AntennaTechnology and Adaptive Multipoint Access Protocol.
The InfiMAN 2x2 portfolio represents a unique proposition to all types of operators (e.g. WISP's, organisations of all sizes, government authorities, etc.) wishing to deliver Fast Ethernet data , voice and video services at ultra long ranges, whilst at the same time providing a wide set of networking features and maintaining strict QoS control. With their increased aggregate bit rates and improved coverage range, our base stations now allow operators to cater for more and higher capacity remote subscriber units than ever before, thus reducing capital expenditure on network infrastructure.
Infinet Wireless' new InfiMAN 2x2 product family is an optimal solution for a diverse range of applications, from Wireless ISP's requiring multi-megabit capacity to corporates, from government authorities to mobile operators.
Applications
- Key applications of the InfiMAN 2x2 family of solutions include:
- High-Speed local or wide area corporate networks
- CCTV and Video surveillance Networks
- Triple-play services forWireless ISP 's
- Long-range Rural Connectivity
- Government & Municipal Networks
Key Features and Benefits
- Available in multiple frequency bands, ranging from 2.3 to 2.6 GHz, and from 4.9 to 6.4 GHz
- Increased NLOS range and performance
- Supports channel width size from 5 to 40 MHz, reducing licence expenditure
- Advanced Quality-of-Service features, offering a reliable and robust solution
- HighTransmit Power Base Stations
- Integrated Sector Antenna Base Stations, ensuring maximum RF performance and quick & simple installation
- New! CCTV optimized Subscriber Terminals with PoE output for camera power supply
Equipment
R5000-Mmx
- High-capacity Integrated Sector Antenna Base-Station
- up to 240 Mbps net throughput
- Middle-to-long range (+ km)
- Transmit power: up to 18 or23dBm (model dependend)Receiver sensitivity: -67..-101 dBm
- Frequency bands: 4.9-6.0 GHz
- Channel bandwidth:5/10/20/40 MHz
- 16 dBidual-pol integrated 90degrees antenna
- Gigabit Ethernet port(10/100/1000 Base-T)RJ-45 connector
- Serial port (RS-232)
- Up to 30 Watts
- Consumption:110-240 VAC @ 50/60 Hz48VDC
- Outdoor Unit (ODU)xxmm 3.7kg
- Indoor Unit (IDU-BS or IDU-BS-G)1xxmm 0.3 kg
R5000-Omx
- High-capacity External AntennaBase-Station
- up to 240 Mbps net throughput
- Middle-to-long range (+ km)
- Transmit power: up to 18 or 23dBm (model-dependend)Receiver sensitivity: -67..-101dBm
- Frequency bands: 2.3-2.6, 4.9-6.4 GHz
- Channel bandwidth:5/10/20/40 MHz
- 2 x N-type (Female) connectors
- Gigabit Ethernet port(10/100/1000 Base-T)RJ-45 connector
- Serial port (RS-232)
- Up to Watts 110-240VAC @ 50/60 Hz48VDC
- Outdoor Unit (ODU): 240 x 240 x 51 2.3kg
- Indoor Unit (IDU-BS-G) 124 x 72 38mm 0.3kg
R5000-Smc
- High-capacity Integratedantenna Subscriber Terminal
- 4, 8, 12, 20 and 35 Mbpsthroughput options (license upgradeable)
- Short-to-Middle range
- Transmit power: up to 18 dBm
- Receiver sensitivity: -74..-101 dBm
- Frequency bands: 4.9-5.9 GHz
- Channel bandwidth:5/10/20/40 MHz
- 21 dBi dual-pol integrated antenna
- 1 x Fast Ethernet (10/100 Base-T)RJ-45 connector
- 1x Fast Ethernet PoE (802.3af)output port (optionally)RJ-45 connector
- Serial port (RS-232)
- Up to 15 Watts
- Consumption:110-240VAC @ 50/60 Hz12-48VDC
- Outdoor Unit (ODU): 240 x 240 x 51 2.3kg
- Indoor Unit (IDU-BSG)124 x 72 x 38 mm 0.3 kg
R5000-Lmc
- High-capacity External antenna Subscriber Terminal
- 4, 8, 12, 20 and 35 Mbpsthroughput options(license upgradeable)
- Middle-to-long range (25+ km)
- Transmit Power: up to 18 dBm
- Receive Sensitivity: -74...-101 dBm
- Frequency bands: 2.3 - 2.6, 4.9-6.1
Features
RADIO
- Voice/RTP Aware Superpacketing - to minimize jitter and latency for multimedia applications
- DFS - for Radar Detection and intelligent search for cleanest channel within a regulatory domain
- Automatic Bitrate Control - to ensure a 100% stable link irrelevant of changes in external conditions
- Automatic Transmit Power Control - to track and keep optimal input signal level to maximize performance for each link and reduce overall interference within a given transmit power and EIRP limitations
- Automatic Distance Learning - to optimize performance for any link distances from tens of meters to 100 km and above
- Channel Time Adjustment - to improve performance on heavily loaded links
- Spectrum Analyzer mode - for interference detection and avoidance
- Channel testing tools - channel performance measurement - advanced diagnostics
MAC
- Dynamic adaptive Polling - Centralized marker grant mode
- Dynamically takes into account channel activity
- Permanent channel testing
Pseudo-radio Interface
Unique InfiNet Wireless feature to join InfiNet Wireless networks via 3rd party equipment (Wired Ethernet segments, IP clouds)
Automatic over-the-air firmware upgrade
MANAGEMENT FEATURES
Web-interface
- basic settings
- channel diagnostics: spectrum analysis, antenna alignment, channel throughput measurement
- unit and RF links monitoring
- maintenance: firmware upgrade, license and configuration import/export
- tech support diagnostic reports generation
- command-line access
Command-line interface for in-depth configuration and diagnostics accessible via:
- secure shell (SSH)
- telnet
- serial port
- remote shell
SNMPv1 / SNMPv3 support
(MIB II, private MIB)
Configurable SNMP Traps
STANDARD COMPLIANCE
Radio
- EN 301 893 v.1.5.1
- EN 302 502 v.1.2.1
EMC
- EN 301 489-1
- EN 301 489-17
Safety
EN 60 950-1:2006
RoHS
Directive 2002/95/EC
NETWORKING
- Ethernet-over-IP tunneling
- ARP protocol support
- MAC/IP filtering
Fully-fledged Layer 2 switch:
- Transparent transport for any type of Ethernet traffic including MPLS, stacked VLANs, etc.
- Multiple switching groups
- Full VLAN support including Q-in-Q (IEEE 802.1q and 802.1ad)
- STP/rSTP support
- IGMP Snooping with Querrier mode -Trunk groups support
RIPv2 / OSPFv2 / static routing
Tunneling
- (Ethernet-over-IP, IP-over-IP)
- L2/L3 Firewall
- NAT (multipool, H.323-aware)
- DHCP client/server/relay
SECURITY FEATURES
- Line-speed AES128 over-the-air encryption
- Storm / flood protection
- Password protection
- Protocol messages encryption
- Secure command-line access via SSH protocol
QUALITY-OF-SERVICE
With many QoS permutations, QoS implementation works transparently in the network based on IEEE802.1p standard as well as ToS/DiffServ, guaranteeing perfect performance under any load and lowest jitter/delays for priority traffic.
Quality-of-Service features:
- 16 priority queues
- IEEE 802.1p support
- IP TOS / DiffServ support
- Full voice support
- Traffic limiting (absolute, relative, mixed)
- Traffic redirection
ENVIRONMENTAL
Outdoor Units:
-40..+60C, 100% humidity, condensing
Indoor Unit:
0..+40C, 95% humidity, non-condensing