Traditional PoE switches come with high port density and are not flexible or optimized for small scale deployments. Users will end up with many unused ports.
Netgear Prosafe 24-Port 10/100/1000 Smart POE Switch - Technical Specifications
Network Protocol and Standards Compatibility
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x full-duplex flow control
- IEEE 802.3at (Power over Ethernet)
Power Supply
- Max 225W
- 100-240V AC/50-60 Hz universal input
- PoE Budget: 192W
Network Ports
- 24 10/100/1000 Mbps auto-sensing Gigabit Ethernet
- 2 combo Gigabit copper/SFP slots
Physical Specifications
- Dimensions:(W x D x H) 440 x 257 x 43 mm (17.3 x 10.1 x 1.6 in)
- Weight: 3.7 kg (8.1 lb)
Performance Specifications
- Forwarding modes: Store-and-forward
- Bandwidth: 48 Gbps
- Network latency: <2,900 ns for 64-byte frames in store-and-forward mode for 1,000 Mbps to 1,000 Mbps transmission
- Buffer memory: 3 Mb per system
- Address database size: 4,000 media access control (MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean time between failures (MTBF): 165,589 hours (~19 years)
- Acoustic noise: -46.5 dB
Electromagnetic Emissions
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- C-Tick
Environmental Specifications
- Operating temperature: 32° to 104° F (0° to 50° C)
- Storage temperature: -4° to 158° F (-20° to 70° C)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
LEDs
- Per port: (10/100 and Gigabit): Link/activity, speed
- Per device: Power
- Per device: Fan failure
- Per PoE ports: PoE power, PoE fault
Electromagnetic Immunity
Safety
- CE mark, commercial
- cUL IEC 950/EN 60950
Administrative Switch Management
- IEEE 802.1Q static VLAN (128 groups, static)
- Voice VLAN
- IEEE 802.1p Class of Service (CoS)
- Port-based QoS
- DSCP-based QoS
- IEEE802.3ad link aggregation (manual or LACP)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
- SNMP v1, v2c, v3
- RFC 1213 MIB II
- RFC 1643 Ethernet interface MIB
- RFC 1493 bridge MIB
- RMON group 1, 2, 3, 9
- RFC 2131 DHCP client
- IEEE 802.1x
- Jumbo frame support
- Port-based security by locked MAC addresses
- Layers 2-4 based ACL
- Storm control for broadcast, multicast and unknown unicast packets
- IGMP snooping v1/v2
- Port-based ingress rate limiting
- SNTP
- Port mirroring support (many to one)
- Web-based configuration
- Configuration backup/restore
- Password access control
- RADIUS support
- TACACS+ support
- Syslog
- Firmware upgradeable
System Requirements
- Category 5 network cables
- Network card for each PC
- Network software (e.g., Windows®)
- Web browser (e.g., Internet Explorer 5.0 or higher, Netscape 6.0 or higher)
Modules
- AGM731F 1000BASE-SX SFP Module
- AGM732F 1000BASE-LX SFP Module
- AGM733 1000BASE-LZ SFP Module
Warranty
- NETGEAR Lifetime Warranty
ProSupport Service Packs Available
OnCall 24x7, Category 2
OnCall 24x7, Category 2
Package Contents
- 24-port or 48-port Smart Switch with Gigabit Ports and PoE
- Rubber footpads
- Power cord
- Rack-mount kit
- Resource CD
- Installation guide
- Warranty/support information card