Availability: In Stock

PheeNet CPE2010G Outdoor WiFi Access Point, Point-to-Point Backhaul

IEEE802.11g Wifi / Wireless Outdoor Bridge(500mW) / Wireless Backhaul,10dBi Sector-Antenna Integrated EIRP=37dBm (H110, E60)

The PheeNet CPE-2010G is a 500mW 802.11b/g Wifi / Wireless Outdoor device for long range wireless transmission,and equips with a 10dBi Sector Antenna integrated. It supports multiple operation modes, AP, WDS, CPE, and can function as Wifi modem to receive wireless signal over the last mile Internet from the WISPs.

While CPE-2010G acts in AP mode, it provides better wall-penetrating signal and long range coverage because of high power. In addition, it can be set up as a WDS mode to establish the point to point bridge connection or multi point bridge connection to build up a large coverage areas.

With rugged IP68 Waterproof rate and metal housing and external LED for signal strength, it eases the effort and hassle for the WISP to implement the solution. PheeNet CPE-2010G is an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments.

Application



Features

1. Compliance with IEEE802.11bg
2. Up to 500mW High Power, 37dBm EIRP
3. Built in 2.4GHz 10dBi Sector Antenna (H110, E60)
4. Support 8 Multiple- BSSID
5. Support 8 WDS setting
6. Enhanced Security by 802.1x, WPA, and AES
7. No of associated clients per AP: 32
8. Setting for maximum no associated clients
9. Support IEEE802.11d Multi country roaming & IEEE802.11h Transmission Power Control
10. Quality of service: IEEE802.11e WMM, IEEE802,11q Tag VLAN Priority Control, IEEE802.11p/CPS, Diffserv/TOS
11. Bandwidth Control (upstream / downstream) while CPE mode
12. Built-in POE
13. Support 3 LEDs Wireless Signal Strength
14. Over load current protection
15. Wide Range Voltage support (12-68VDC)
16. IP68 rated Waterproof
17. Weater-Proof M-13 RJ45 Connector and N-Type Connector

Industrial Standard

Standard

• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.11
• IEEE 802.3u 100Base-TX Fast Ethernet
• IEEE 802.11d
• IEEE 802.11h

Interface
10/100Base-TX (RJ-45) x 1 W/ POE function

Security

• 64/128/156-bit WEP
• 802.1x, WPA TKIP, WPA2 AES/Mixed mode for PSK and TLS(Radius)
• MAC Address Filter (deny or accept)
• User Isolation
• Hidden ESSID
• VLAN Assignment on ESSID
• No. of registered Radius Server: 2   

RF

Frequency Band

2.4GHz      

Signal Type

• 802.11g: OFDM
• 802.11b: DSSS         

Modulation

• 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
• 802.11b : DSSS(CCK, DQPSK,DBPSK)   

Sensitivity

• 1Mbps: -96dBm, 6Mbps:-93dBm,
• 11Mbps:-89dBm,54Mbps:-74dBm   

Output Power

EIRP=37dBm         

Transmit Power Control

9 levels      
     
Channel

802.11b/g : 11 for FCC, 14for Japan13 for Europe, 2 for Spain, 4 for France         

Operating Mode

• AP Mode
• WDS Mode (Repeater/Bridge)
• CPE Mode (Client Bridge)   

Network

• DHCP/NAT Server
• DHCP Client (CPE Mode)
• PPPoE
• MAC Clone   

Management

• Web configuration, Signal Strength
• Support SNMP v2c /v3
• Support MIB II
• Support Telnet
• Support HTTP/WEB
• Support TFTP
• Command Line Interface (CLI)
• Event log
• Remote Link Test display connection

Hardware

Processor

AR2315      
 
Flash

4MB         

LED Indication

Power, LAN ,Wireless, Wireless Strength (3* LEDs )         

Antenna

10dBi Sector Antenna (H110, E60)         

Environment

• Operating Temperature: -30 °C ~ 60 °C
• Storage Temperature: -30 °C ~ 85 °C
• Humidity: 100%(non condensing)

Power Supply

• AC Input : 110 – 220V AC Power
• DC Output : 12 VDC, 1.5A input (Power Injector)
• DC Output: 48VDC, 0.4A input (POE Power Injector)   

Power Consumption

9W      
     
Waterproof

IP68 Certificated      

Mounting

Wall Mount and Pole Mount, Die-Cast aluminum Enclosure          

Dimensions

162 (L) x 102 (W) x 58 (H) mm          

Weight

0.66Kg

Specifications Tab

Questions Tab